An Investigation of Ammonia Effect on Dissolution and Recovery of Gold in Cyanidation Process of Copper-Gold Ore

Document Type : Research - Paper

Authors

1 M.Sc., Dept. of Minerals Processing, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran

2 Associate Professor, Dept. of Minerals Processing, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran

3 M.Sc., Tuzlar Industrial and Mining Company, Zanjan, Iran

Abstract

The presence of copper oxide next to gold increases the consumption of cyanide in the cyanidation process, reduces the absorption of gold on carbon, and causes many problems in the downstream processes of elution, electrowinning, and smelting. In the current research, increasing the recovery of gold dissolution and its selective adsorption on activated carbon using ammonia additive and the effect of different factors such as the type of ammonia additive, changing the system of contact of gold with carbon from CIL to CIC, and adding hydrogen peroxide and cyanide to the filtered solution were studied. The findings showed that adding ammonium chloride or liquid ammonia to the cyanidation solution, in the sample with high copper grade (1% copper), and in the sample with medium copper grade (0.5% copper), increased the dissolution recovery by 60% and 30%, respectively. Also, the recovery of gold adsorption on activated carbon in sample with a grade of 0.5% copper increased from about 25% during the normal CIL process to about 100% during the ammonia cyanidation process in the form of CIC. Results showed that liquid ammonia provides up to 10% higher dissolution recovery and up to 3% higher absorption recovery compared to ammonium chloride, while reduces the consumption of cyanide by half and the amount of copper absorption on carbon by a third.

Keywords

Main Subjects

References

  1. Zhang, Y., Cui, M., Wang, J., Liu, X., and Lyu, X. (2022). “A review of gold extraction using alternatives to cyanide: Focus on current status and future prospects of the novel eco-friendly synthetic gold lixiviants”. Minerals Engineering, 176: 107336.
  2. Dai, X., Simons, A., and Breuer, P. (2012). “A review of copper cyanide recovery technologies for the cyanidation of copper containing gold ores”. Minerals Engineering, 25(1): 1-13.
  3. Shantz, R., and Reich, J. (1978). “A review of copper-cyanide metallurgy”. Hydrometallurgy, 3(2): 99-109.
  4. Muir, D. M., La Brooy, S. R., and Cao, C. (1989, November).  “Recovery of gold from copper-bearing ores”. In: Gold Forum on Technology and Practices-World Gold, 89: 363-374.
  5. Dunne, R. (2005). “Flotation of gold and gold-bearing ores”.  Developments in Mineral Processing, 15: 309-344.
  6. Li, J., and Miller, J. D. (2006). “A review of gold leaching in acid thiourea solutions”. Mineral Processing and Extractive Metallurgy Review, 27(3): 177-214.
  7. Ray, D. A., Baniasadi, M., Graves, J. E., Greenwood, A., and Farnaud, S. (2022). “Thiourea Leaching: An Update on a Sustainable Approach for Gold Recovery from E-waste”. Journal of Sustainable Metallurgy, 8(2): 597-612.
  8. Salinas-Rodríguez, E., Hernández-Ávila, J., Cerecedo-Sáenz, E., Arenas-Flores, A., Veloz-Rodríguez, M. A., Toro, N., Gutiérrez-Amador, M. D. P., and Acevedo-Sandoval, O. A. (2022). “Leaching of copper contained in waste printed circuit boards, using the thiosulfate—oxygen system: a kinetic approach”. Materials, 15(7): 2354.
  9. Barani, K., Dehghani, M., Azadi, M. R., and Karrech, A. (2021). “Leaching of a polymetal gold ore and reducing cyanide consumption using cyanide-glycine solutions”. Minerals Engineering, 163: 106802.
  10. Li, H., Oraby, E., and Eksteen, J. (2021). “Recovery of copper and the deportment of other base metals from alkaline glycine leachates derived from waste printed circuit boards(WPCBs)” . Hydrometallurgy, 199: 105540.
  11. Medina, D., and Anderson, C. G. (2020). “A review of the cyanidation treatment of copper-gold ores and concentrates”.  Metals, 10(7): 897.
  12. Bae, M., Kim, S., Sohn, J., Yang, D., and Lee, H. (2020). “Leaching behavior of gold and silver from concentrated sulfide ore using ammonium thiosulfate”.  Metals, 10(8): 1029.
  13. Hedjazi, F., and Monhemius, A. J. (2014).  “Copper–gold ore processing with ion exchange and SART technology”.  Minerals Engineering, 64: 120-125.
  14. Estay, H., Gim-Krumm, M., Seriche, G., Quilaqueo, M., Barros, L., Ruby-Figueroa, R., Romero, J., and  Troncoso, E.  (2020). “Optimizing the SART process: A critical assessment of its design criteria”. Minerals Engineering, 146: 106116.‏
  15. Cong, P., Chai, L., Tang, C., Min, X., Song, Y., Duan, C., and Yu, C. (2017). “Study on the mechanism of copper–ammonia complex decomposition in struvite formation process and enhanced ammonia and copper removal”. Journal of Environmental Sciences, 51: 222-233.
  16. Xie, F., Dreisinger, D., and Doyle, F. (2013). “A review on recovery of copper and cyanide from waste cyanide solutions”. Mineral Processing and Extractive Metallurgy Review, 34(6): 387-411.
  17. Sceresini, B., and Staunton, W. P. (1991, October). “Copper/cyanide in the treatment of high copper gold ores”.  In: Proceedings of the 5th Extractive Metallurgy Conference, Melbourne: The Australasian Institute of Mining and Metallurgy, 123-125.
  18. Hedjazi, F., and Monhemius, A. J. (2018). “Industrial application of ammonia-assisted cyanide leaching for copper-gold ores”. Minerals Engineering, 126: 123-129.
  19. Jeffrey, M. I., Linda, L., Breuer, P. L., and Chu, C. K. (2002).  “A kinetic and electrochemical study of the ammonia cyanide process for leaching gold in solutions containing copper”. Minerals Engineering, 15(12): 1173-1180.
  20. Muir, D. M. (2011). “A review of the selective leaching of gold from oxidised copper–gold ores with ammonia–cyanide and new insights for plant control and operation”. Minerals Engineering, 24(6): 576-582.
  21. Costello, M. C., Ritchie, I. C., and Lunt, D. J. (1992). “Use of the ammonia cyanide leach system for gold copper ores with reference to the retreatment of the torco tailings”. Minerals Engineering, 5(10-12): 1421-1429.
  22. Huffman, C., Mensik, J. D., and Riley, L. B.  (1967). “Determination of gold in geologic materials by solvent extraction and atomic-absorption spectrometry (No. 540-559)”.  US Government Printing Office, 1-6.
  23. Baedecker, P. A. (1987).  “Methods for geochemical analysis (No. 1766-1770)”. US Government Printing Office, pp. 187.
  24. Deng, Z., Oraby, E. A., and Eksteen, J. J. (2020). “Sulfide precipitation of copper from alkaline glycine-cyanide solutions: Precipitate characterisation”.  Minerals Engineering, 145: 106102.
Journal of Mineral Resources Engineering
Volume 8, Issue 3 - Serial Number 29
October 2023
Pages 91-106

Files

History

  • Receive Date: 17 August 2022
  • Revise Date: 02 May 2023
  • Accept Date: 14 February 2023

Share

How to cite

Statistics